Description
>>> GebrAnw-Dental-Base-Alloy-TK-4.pdf <<<
Type: | Dental casting alloy on the silver basis, type 4 (extra hard)
acc. DIN EN ISO 22674 |
Colour: | white |
Applicable scope: | Inlays, Onlays | ● |
Crowns | ● | |
Small bridges | ● | |
Large-span bridges | ● | |
Milling, cone and attachment works | ● | |
Modeling casting | ● |
Composition: | Au | 4,00 | Ru | 0,20 |
(mass fraction in %) | Ag | 47,80 | Sn | 2,00 |
In | 2,00 | Zn | 4,00 | |
Pd | 40,00 |
Technical specifications: | Density in g/cm³ | 11,1 |
Vickers hardness HV 5/30 | (s)190 (a-s)200 | |
Yield strength Rp0,2 in MPa | (s)420 (a-s)470 | |
Elongation at break in % | (s)10 (a-s)10 | |
Elastic modulus in GPa | 100 | |
Melting interval in °C | 1070-1170 |
Processing: | Preheating temp. of the casting moulds in °C | 800 |
Casting temperature in °C | 1300 | |
Crucibles | Ceramic | |
Curing | 550°C/ 15min |
Suitable solders: | Joints as modeling alloy | AL 800 |
Joints as modeling alloy | AL750 |
1) Brief description:
s – self-curing, n – after ceramic firing, a-s – curing from s condition
a-n – curing from n condition
2) All information about cured condition is given according to the alloy:
– Oxide firing 10min/ 960°C + 4x4min/ 960°C for yellow conventional bonding alloys
– Oxide firing 10min/ 980°C + 4x4min/ 980°C for white conventional bonding alloys
– Oxide firing 10min/ 800°C + 4x4min/ 800°C for LFC-systems
Corresponding data are true under these conditions only.
3) The ceramic firing should be carried out according to the manufacturer's instructions.
Reviews
There are no reviews yet.